Kein sauberer Harz-Flüssigkeits-Fluss für PWB, das hellgelbes transparentes lötet
Preis: Call/negotiable
MOQ: 10 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:0.803 gravity Rosin Liquid Flux, No clean Rosin Liquid Flux, 0.803 gravity flux for pcb soldering
Rosin type liquid flux Light yellow transparent liquid No-clean flux 1. Introduction 1) This flux is a no-clean flux with medium solid content (4.5% solid content), halogen-free and high activity. It can be used in foaming, spraying and other forms. 2)The resin active system has excellent wettabilit... Mehr sehen
➤ Besuch Webseite
ECO-transparente Reinigungskorrosion weg vom elektrischen Leiterplatte-flüssigen saubereren Mittel
Preis: Call/negotiable
MOQ: 10 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:ECO cleaning corrosion off circuit board, transparent cleaning corrosion off circuit board, electric circuit board cleaner 0.98 gravity
Environmentally friendly electronic cleaning agent colorless transparent liquid cleaning agent 1. Health and safety * Avoid inhaling too much AQ001-A cleaning agent fumes, which can cause headaches, dizziness, and nausea. * It must be used in a ventilated area and equipped with corresponding ventila... Mehr sehen
➤ Besuch Webseite
Lötpaste
(13)
Sn99.3Cu0.7 1012 Harz-Flussmittel-Paste der Ohm-hohen Temperatur der Lötpaste-221C
Preis: Call/negotiable
MOQ: 1 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:Sn99.3Cu0.7 high temperature solder paste, 1012 ohm high temperature solder paste, 221C rosin soldering flux paste
No-clean solder paste Sn99.3Cu0.7 high temperature solder paste gray paste 1. Introduction 9307 solder paste is composed of special flux and low oxidation spherical solder powder, which is lead-free and environmentally friendly. It adopts high-performance thixotropic agent and has excellent solubili... Mehr sehen
➤ Besuch Webseite
21mm 183 Grad-Klempner-verbleiter Lötmittel-Stangen-niedriger Stand für das Wellen-Löten
Preis: Call/negotiable
MOQ: 1 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:21mm Leaded Solder Bar, 183deg Leaded Solder Bar Low level, plumbers solder bar for wave soldering
Leaded solder bars Low-level solder bars Various solder bars for wave soldering The low-degree lead solder bars produced by our company (55 degrees, 50 degrees, 45 degrees, 40 degrees, 35 degrees, 30 degrees) are made of Yunheng pure tin ingots with Sn≥99.95 content and electrolytic pure lead metal ... Mehr sehen
➤ Besuch Webseite
Alkyd, das Isolierlack-Farben-konforme Beschichtung für PWB-Versammlungen lufttrocknend isoliert
Preis: Call/negotiable
MOQ: 1 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:alkyd insulating air drying insulating varnish, amino resin air drying insulating varnish, 28 SEC conformal coating for pcb assemblies
Low-temperature drying type alkyd insulating paint high-insulating three-proof paint 1. product description 8562E is made of modified alkyd resin and amino resin. The paint film has a combination of high solids. It is mainly designed to protect and provide high insulation performance for electrical ... Mehr sehen
➤ Besuch Webseite
Fluss-Verdünner
(10)
Transparente Beweis-4.5C drei Farben-Verdünner-chemische brennbare und brennbare Flüssigkeiten
Preis: Call/negotiable
MOQ: 10 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:4.5C flash point paint thinner chemical, three proof paint thinner chemical, Transparent flammable and combustible liquids
Transparent water clear thinner special thinner for three anti-paint 1.Product Introduction T871Y is a matching thinner used for three-proof paint, and its main component is composed of aromatic hydrocarbon solvents. Solvent composition: aromatic hydrocarbons and other solvents Packing specificatio... Mehr sehen
➤ Besuch Webseite
120 Kgf/der hohen Temperatur des roten Kleber-cm2 Kleber-Smt 110 Grad konservierende Löten
Preis: Call/negotiable
MOQ: 1 tons
Lieferzeit: 5-8 days
Marke: Wuxi Top Chemical
Markieren:120 kgf/cm2 Red Glue Adhesive, Red Glue Adhesive 110 deg, high temperature adhesive red glue smt
Red dispensing with fixed auxiliary function, suitable for wave soldering and tinning at one time 1.Application Bond various CHIPS on the PCB board before entering the wave soldering. This product is especially suitable for high-speed dispensers and screen printing. HT-130-AL red glue, epoxy resin (... Mehr sehen
➤ Besuch Webseite